ASA 5525 9.1 Multiport: Mapping Issue

Wondered: There is an OREJA 5525 type 9. just one firewall as well as a intranet handle 192. 168. 1 . 30 of videos server, which will mapped for you to 202. 106. 4. 56. There are tcp 1720 443 and tcp/udp 50000 to help 50499 array at the harbour. I want to realize how to run often the port mapping, or stationary NAT, and how they can map 192.168.1.20 to 202.106.4.5 directly?

There is also a mapping get of a opening. TCP 40 port with the intranet web server 192. 168. 1 . 12 is planned to the TCP 80 slot of 202. 106. 5. 96, to ensure the user about external multilevel enable gain access to the TCP 80 interface of the intranet server 192.168.1.20 together with the TCP eighty port associated with 124. 193. 224. one hundred thirty.

Mapping control:
bject network nat-in1.10-tcp80
host 192.168.1.10

nat (inside,outside) static 202.106.4.96 service tcp 80 80
access-list outtoin extended permit tcp any host 192.168.1.10 eq www
access-group outtoin in interface outside

But there are so many ports, do I have to write more than 500 mappings?

Answer:
You can search this way down below:
object  network inside-server
host 192.168.1.20

object network outside-map
host 202.106.4.56

object server  P-MAP
service tcp destination range 50000 50499

nat (outside,inside) source static any
access-group 100 in interface outside

Questioned: Thanks a lot, done.